Skip to content
Zap Electrical & Data

LED & Feature Lighting · Parkdale

LED & Feature Lighting in Parkdale

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657

Many mid-century Parkdale houses still run their first lighting layout: a batten or pendant in the middle of each room, perhaps a fluorescent tube in the kitchen, all on wiring from the same era. Renovations are the natural time to change that, because ceilings and walls are already open. Owners adding a second storey face a particular timing issue with the downstairs ceilings, and the shops along Como Parade bring their own display and signage questions.

About our led & feature lighting service

Lighting the ground floor before a second storey covers it

Once a second storey goes on, the ground floor loses its roof space. After that, adding a downlight or moving a pendant downstairs means cutting into the ceiling from below and patching, with no easy cable path. So the best time to plan ground-floor lighting is while the roof is off and the joists are exposed.

We run cable for every position you might want, including spare runs for future wall lights, and test the old lighting circuits at the same time. Upstairs, pendants, bedside wall lights and stair lighting are planned around the builder's frame schedule.

Shopfronts along Como Parade

Older shop buildings along the strip often still have fluorescent battens, halogen display spots and signage lighting that has been patched over several tenancies. Converting to LED lowers running costs and heat, which matters in a small shop with a glass frontage.

Track lighting lets a retailer move heads as displays change, and a time clock keeps the window lit into the evening. Where a flat above shares wiring with the shop, we trace which lights belong to which tenancy before changing anything, so a fault downstairs no longer leaves the residents in the dark.

FAQ

Common questions

Should I rewire before changing my lights to LED?

Not always. If the existing lighting circuits test well, new fittings can go straight on. If the wiring is rubber-insulated or has no earth, it is better to replace it first, ideally during a renovation when access is easy.

Can a central pendant point be turned into several downlights?

Yes. We run new cable from the existing point or the switch to each new position. In a room with a decorative ceiling, a larger pendant or wall lights may suit better, and we talk through both before you decide.

Book a free on-site quote

Call EricFree quote