Skip to content
Zap Electrical & Data

Local electrician · Hampton

Electrician in Hampton

Hampton is around 25 minutes from our base, a trip we make regularly for renovation and upgrade work. Much of the housing is older and well kept, and owners here tend to plan their electrical work carefully rather than patch it.

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657

Most of our jobs in the suburb are residential: rewiring period homes during renovations, lighting for extensions, switchboard upgrades and EV chargers for new builds. We also look after shops and cafes on the main street that need lighting, power or emergency light testing.

Because Eric quotes and does the work himself, the person who walked through your house and listened to the plan is the same person in your roof space on the day.

Where we work in Hampton

We work along and around Hampton Street, from the station end through the shopping strip towards the bay, and across the residential streets either side down to Beach Road and the foreshore. The village shops are a mix of long-standing retailers, cafes and service businesses, many in older buildings with wiring that has been extended more than once.

Homes and buildings

Edwardian houses, Californian bungalows and interwar brick homes make up a lot of the streetscape, with large contemporary rebuilds on many blocks. In the older homes we regularly find a mix of original and updated circuits, rubber or early plastic insulated cable in the roof space, and boards with only one or two safety switches. Renovations are the natural time to fix that, before new plaster and paint go on. Under-floor space in many of these homes is tight, so access is one of the first things we look at during the quote.

Lighting for renovations and extensions

A new kitchen or rear extension usually means rethinking the lighting. We help with layout, dimmable LED downlights, pendant positions, joinery strip lighting and garden lighting, and we install fittings rated for salt air when they are close to the water. Getting the plan right at frame stage avoids cutting into finished ceilings later.

Switchboards in older homes

Many boards in the suburb's older houses are still the original timber-backed panel, sometimes with rewireable fuses and a newer safety switch squeezed in beside them. A replacement board with RCD protection on every circuit, clear labelling and spare space for future work is often the single most useful upgrade in a period home. We check the main earth and the consumer mains at the same time, since these are often as old as the board.

Working in older shopfronts

Shops along the strip often have a tenancy board that has grown over decades. We can sort out tripping circuits, add power for new equipment, upgrade display lighting and test exit and emergency lights to AS/NZS 2293.

Free quote

Request a free quote

  • Free on-site quote

    Eric comes out, looks at the job and gives you a clear written quote.

  • No call-out fee on quoted work

    You only pay for the work you approve.

  • We aim to call back within the hour

    During business hours, Mon–Fri 7:00am–5:00pm.

  • 12-month workmanship warranty

    Fully licensed and insured. REC 23657.

Eric Felices

The person who quotes your job
is the person who does it.

Prefer to talk? 0400 364 638

FAQ

Common questions

Will a rewire damage original plaster and cornices?

Not if it is planned well. We use the roof space and under-floor access wherever possible and choose cable routes that keep cutting to a minimum, then patch small access holes neatly.

Do you install EV chargers in Hampton?

Yes. We check whether your supply and switchboard can carry the load, then install the charger on a dedicated circuit with its own protection.

Do you work for businesses on Hampton Street?

Yes, including lighting upgrades, extra circuits, fault finding and six-monthly emergency lighting tests with logbook records.

Do you offer a warranty?

Every job carries a 12-month workmanship warranty, and a Certificate of Electrical Safety is issued whenever the work calls for one.

Can you plan lighting before the builder starts?

Yes. We can go through your plans or walk the site, mark out downlights, pendants, switches and power points, and price it all before frame stage so there are no surprises later.

Can you replace old halogen downlights with LEDs?

Yes. Swapping halogen downlights for LED fittings cuts heat in the ceiling and lowers running costs. We check the transformers and wiring as we go and replace anything that is past its best.

Nearby areas

Call EricFree quote