Residential · Bayside, Peninsula & CBD
EV Charger Installation in Bayside & the Peninsula
A wall charger turns a slow overnight top-up from a power point into a full charge while you sleep. Getting it right means checking your switchboard and supply capacity, choosing the right cable run, and protecting the circuit properly.
- Free on-site quote
- No call-out fee on quoted work
- 12-month workmanship warranty
- REC 23657

Overview
Charge Your Electric Vehicle Faster at Home
As electric vehicles (EVs) become increasingly popular, the need for reliable and fast home charging solutions has never been greater. Relying on a standard wall socket to charge your EV is incredibly slow, often taking over 24 hours for a full charge, and can put a dangerous strain on your home's standard electrical wiring. At Zap Electrical, we provide professional EV charger installations to get you back on the road safely and quickly.
We install dedicated Level 2 EV charging stations that can charge your vehicle up to 10 times faster than a standard power point. Whether you drive a Tesla, Nissan, Hyundai, or any other electric vehicle, our licensed electricians will ensure your charger is installed securely and integrated perfectly with your home's electrical system.
What’s included
- Site assessment of your switchboard and supply capacity
- Advice on charger type and location (garage, carport or driveway)
- Dedicated circuit with correct cable sizing and RCD protection
- Wall or pedestal mounting, weatherproof where needed
- Integration with solar where the charger supports it
- Testing, commissioning and Certificate of Electrical Safety
EV Charger Installation
Benefits of a Dedicated EV Charger
- 01
Significantly Faster Charging
Wake up to a fully charged vehicle every morning with powerful Level 2 charging capabilities.
- 02
Enhanced Electrical Safety
Dedicated circuits prevent overloading your home's switchboard and protect against fire hazards.
- 03
Smart Charging Features
Schedule charging during off-peak electricity rates to save money, and monitor usage via smartphone apps.
- 04
Increased Property Value
A home equipped with an EV charger is highly attractive to modern buyers and adds value to your property.
Expert Installation & Assessment
Installing an EV charger is not a simple DIY job; it requires a licensed electrician to assess your home's current electrical capacity. Before installation, we conduct a thorough load assessment of your switchboard to ensure it can handle the significant power draw of an EV charger. If your switchboard is outdated or lacks capacity, we can perform the necessary upgrades simultaneously.
We also offer commercial EV charger installations for businesses looking to provide charging amenities for employees or customers. This is an excellent way to demonstrate your commitment to sustainability and attract EV drivers to your premises.
Ready to make the switch to faster, safer charging? Contact Zap Electrical today to discuss the best EV charging solution for your vehicle and your property.
Choosing a charger: single-phase, three-phase and cable type
Most houses across Bayside and the Peninsula run on a single-phase supply, which suits a wall charger of around 7 kW. Plugged in overnight, that comfortably covers the way most people drive during the week. A 22 kW charger only makes sense with a three-phase supply and a car that can accept that rate, and many cars cannot. You also choose between a tethered unit, with the cable permanently attached, and a socket-only unit where you plug in your own Type 2 lead.
Tethered is quicker to use every day; socket-only looks neater on the wall and suits shared parking where several cars use one charger. Smart features usually matter more than headline speed: scheduling around off-peak rates, solar priority, and load management that slows charging while the house is drawing heavily. We talk through your car, your driving and your electricity plan before suggesting a model, and we are happy to install a unit you have already chosen.
What shapes the installation cost
No two charger installs are priced the same, because the cable run does much of the work. The distance from the switchboard to the parking spot sets the cable size, since longer runs need heavier cable to keep voltage drop within limits. How that cable gets there matters as well: through an open roof space, along a garage wall, or under a concrete driveway in conduit.
The condition and spare capacity of your board decide whether a new circuit can simply be added or the board needs attention first. Pedestal mounting in an open driveway, weatherproof enclosures and any trenching or core drilling add to the scope. If load management is needed so the charger and the rest of the house can share a limited supply, that hardware and setup is included too. You get every part itemised in writing before anything is booked.
Safety, standards and certification
A wall charger draws close to its full rating for hours at a time, unlike a kettle that runs for two minutes. It needs its own dedicated circuit, cable sized for continuous load, and RCD protection of the type the charger's maker specifies, because some units also need protection against DC fault current. The work is done to AS/NZS 3000, and once the charger is tested and commissioned you receive a Certificate of Electrical Safety.
Outdoor units need a suitable IP rating and, close to the water, fixings and enclosures that stand up to salt air. We also check that the charger is approved for sale in Australia and installed to the manufacturer's instructions, which keeps its product warranty intact. Charging from an ordinary power point with the lead that came with the car is fine now and then, but nightly use on an older circuit puts heat into outlets and wiring never meant for it.
Charging in apartments, townhouses and workplaces
Shared car parks raise questions a house does not. In an apartment block the owners corporation usually has to approve work on common property, and there needs to be a fair way of billing each user, either through a dedicated sub-meter or a charger with its own usage reporting. Building supply is often the limit, so load management that shares the available capacity between several chargers is usually more practical than upgrading the whole site.
In townhouse developments with separate garages, the question is often where each owner's supply comes from and how far the cable has to travel. For workplaces, we look at how many staff or fleet vehicles need charging, how long they are parked, and whether bays can be rolled out in stages, with conduit run now so later chargers are quick to add. A short written assessment can go to the committee or business owner before anyone commits to a full installation.
Who it’s for
Who we do this for
Homeowners
Single chargers for garages and carports, set up for overnight charging.
Businesses
Staff and fleet charging, planned around your existing supply and parking.
Owners corporations
Advice on shared car park charging and fair, practical layouts.
How it works
- 01
Request a quote
Online or by phone. We aim to call back within the hour.
- 02
Free on-site visit
Eric assesses the job and talks you through options.
- 03
Clear written quote
Itemised, with no call-out fee on quoted work.
- 04
Job done + warranty
Tested, certified and covered for 12 months.
FAQ
EV Charger Installation questions
Do I need a switchboard upgrade for an EV charger?
Not always. If your board is an older fuse type or has no spare capacity, an upgrade may be needed. We check during the free on-site quote.
Can you install a charger I have already bought?
Yes, as long as it is an Australian-approved unit. Tell us the model when you request a quote.
Can the charger run off my solar?
Many chargers can prioritise solar. We will tell you whether your charger and system support it.
How long does an EV charger installation take?
A straightforward home install, with the switchboard close to the garage and a clear cable route, is usually finished in a few hours. Longer cable runs, trenching under a driveway or a switchboard upgrade beforehand can stretch the job to a full day. You will know which applies after the free on-site quote, and we tell you how long the power will be off before work starts. If a switchboard upgrade is needed, it is usually done at the same visit so you are not without power twice.
Is a 7 kW home charger fast enough?
For most households, yes. Plugged in overnight, a 7 kW charger adds far more range than a typical daily commute uses, so the car starts each morning full. Faster home charging needs a three-phase supply and a car that can accept a higher rate, so it is worth checking both before paying extra for a bigger unit that the car may never use at full speed. If you are likely to change cars in a few years, we can size the cable so a faster charger can be fitted later.
Can my charger be set to run on off-peak power?
Most smart chargers can be scheduled through their app, and many cars can do the same from their own settings. We set the charger up at commissioning, connect it to your Wi-Fi where needed, and show you how to change the schedule to suit your electricity plan or to favour daytime solar if you have panels.
Free quote
Get a quote for ev charger installation
Free on-site quote
Eric comes out, looks at the job and gives you a clear written quote.
No call-out fee on quoted work
You only pay for the work you approve.
We aim to call back within the hour
During business hours, Mon–Fri 7:00am–5:00pm.
12-month workmanship warranty
Fully licensed and insured. REC 23657.

The person who quotes your job
is the person who does it.
Related services
Switchboard Upgrades
Modernize your electrical system with safe, compliant switchboard upgrades to handle today's power demands.
Commercial Electrician
Comprehensive electrical solutions for businesses, from fit-outs to routine maintenance and safety checks.
Residential Electrician
Expert installations, repairs, and maintenance for your home to ensure safety and comfort for your family.
EV Charger Installation by suburb
Bayside
Kingston
- EV Charger Installation Mordialloc
- EV Charger Installation Aspendale
- EV Charger Installation Aspendale Gardens
- EV Charger Installation Edithvale
- EV Charger Installation Chelsea
- EV Charger Installation Bonbeach
- EV Charger Installation Patterson Lakes
- EV Charger Installation Keysborough
- EV Charger Installation Parkdale
- EV Charger Installation Mentone
- EV Charger Installation Cheltenham
- EV Charger Installation Moorabbin
- EV Charger Installation Heatherton
- EV Charger Installation Dingley Village
- EV Charger Installation Braeside
- EV Charger Installation Waterways
- EV Charger Installation Carrum
Frankston & surrounds
Mornington Peninsula
Greater Dandenong
Melbourne CBD
