Skip to content
Zap Electrical & Data

Commercial · Bayside, Peninsula & CBD

Office Fit-out Electrician in Melbourne's South-East & CBD

A fit-out runs to a deadline. The electrician needs to work with the builder, joiner and IT provider, and turn up on the day they are booked so the next trade is not held up.

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657
LED strip lighting installed in custom shelving

Overview

About our office fit-outs service

We wire offices, shops and clinics from the first walk-through to handover: power and lighting layouts, workstations, data points, switchboard changes and emergency lighting. Eric is on site and on the phone for the whole job.

What’s included

  • Walk-through and layout advice for power, lighting and data
  • Workstation power, floor boxes and joinery integration
  • LED lighting, including feature and display lighting
  • Data cabling and comms cabinet installation
  • Switchboard alterations and new sub-boards
  • Exit and emergency lighting, tested and logged at handover

Base building rules, landlords and approvals

Before any cable is run, it pays to know what belongs to the landlord and what belongs to the tenancy. Most commercial buildings have a fit-out guide or design guidelines covering how tenancy switchboards connect to the base building, where cables can run through risers, which ceilings can be opened, and how new emergency lighting ties into the existing system. Many also want drawings approved by the building manager before work starts, along with contractor inductions and booked access to goods lifts and loading docks.

In larger towers, especially in the CBD, noisy work such as core drilling is often restricted to outside office hours so other tenants are not disturbed. We read the guide early and raise anything that could affect the program, so approvals are not the thing that holds up the builder. If a landlord's engineer needs to review the electrical design, we allow time for that in the schedule from the start.

Planning power, data and lighting for the way you work

A layout that looks right on paper can still leave staff running extension leads. Counting the real loads helps: how many screens each desk carries, where printers, kitchen appliances and heaters will sit, what meeting rooms need for displays and video calls, and where wireless access points should go for even coverage. Open-plan desks are usually fed through power poles, floor boxes or desk-mounted outlets, and each suits a different floor and ceiling type.

Lighting has to suit screen work without glare, and commercial fit-outs must meet the lighting energy limits in the National Construction Code, which favours efficient LED fittings with sensible controls such as occupancy sensors in meeting rooms and amenities. Getting these decisions settled before rough-in avoids expensive changes after the plasterers have finished, and it gives your IT provider a clear plan to work from for comms equipment. Allow spare capacity on each circuit for the equipment that always arrives after move-in.

Timeline: rough-in, fit-off and handover

Electrical work on a fit-out happens in stages that slot between other trades. After strip-out and any demolition, rough-in runs cabling through ceilings and partition walls before the plasterboard goes up, along with conduits for floor boxes and data. Then the walls are lined, ceilings go in and painters move through. Fit-off comes next: power outlets, light fittings, switches, data faceplates and the comms cabinet.

Before handover every circuit is tested, emergency lighting is discharge tested and logged, and each data outlet is tested and labelled. You receive the Certificate of Electrical Safety, an updated circuit schedule and test results for your records and the landlord's. How long each stage takes depends on floor area and the builder's program, and we agree dates with the project manager at the start. If the program shifts, we adjust and keep the builder informed rather than letting a missed day roll on.

Fit-out costs: what moves the number

A fit-out quote reflects the drawings and the site, so the biggest factors are floor area and the number of workstations, data points and light fittings. Whether existing cabling can be reused or has to be stripped out also makes a real difference. Ceiling type matters: suspended grid ceilings are quick to work above, while set plaster or exposed concrete takes far more time and care.

If the tenancy switchboard is too small for the new layout, a new sub-board or upgrade adds to the scope. Feature lighting in reception, specified designer fittings, work outside office hours and building manager requirements all play a part as well. We quote from your plans and the walk-through, list each item separately, and point out options where a different product or layout would achieve the same result with less labour. That gives you room to make decisions before work starts rather than during it.

Who it’s for

Who we do this for

Business owners

Moving in, expanding or refreshing a tired workspace.

Builders & project managers

A reliable electrical trade that keeps to the program.

Landlords

Getting a vacant tenancy ready for the next lease.

How it works

  1. 01

    Request a quote

    Online or by phone. We aim to call back within the hour.

  2. 02

    Free on-site visit

    Eric assesses the job and talks you through options.

  3. 03

    Clear written quote

    Itemised, with no call-out fee on quoted work.

  4. 04

    Job done + warranty

    Tested, certified and covered for 12 months.

FAQ

Office Fit-outs questions

Can you work with our builder and IT provider?

Yes. We coordinate with the other trades and your IT provider so data and power are where they need to be.

Do you do the data cabling as well?

Yes. Power, lighting and data can all be done by us, which saves coordinating another contractor.

How do you quote a fit-out?

We walk the site with you, review any plans, then send a written, itemised quote.

Can you start before the drawings are finalised?

Yes. An early walk-through helps settle power and data positions before the drawings are locked, and it often catches problems such as a switchboard that is too small or a riser that is already full. We then update the quote once final plans are issued, so you are paying for the actual design rather than guesses made at the start. Changes during the build are priced as variations and agreed in writing before the work goes ahead.

Can existing cabling be reused in a refurbishment?

Sometimes. Data cabling of a recent category in good condition can often stay, with new patch leads and fresh labelling. Old power and lighting circuits are tested before we recommend keeping them. Anything that does not meet current standards, or no longer suits the new layout, is removed rather than left disconnected in the ceiling for the next tenant to puzzle over. Redundant cable is a common item on landlords' make-good lists, so clearing it now also helps at the end of the lease.

Do you fit out shops and medical clinics as well as offices?

Yes. Shops need display lighting, point-of-sale power and data at the counter, while clinics often need extra outlets in treatment rooms and dedicated circuits for equipment. The process is the same as an office: a walk-through, a written itemised quote, then staged work around the builder and other trades. Retail fit-outs often run to a fixed opening date, so we plan the program backwards from it. Clinics may also need equipment suppliers on site at fit-off, which we schedule together.

Free quote

Get a quote for office fit-outs

  • Free on-site quote

    Eric comes out, looks at the job and gives you a clear written quote.

  • No call-out fee on quoted work

    You only pay for the work you approve.

  • We aim to call back within the hour

    During business hours, Mon–Fri 7:00am–5:00pm.

  • 12-month workmanship warranty

    Fully licensed and insured. REC 23657.

Eric Felices

The person who quotes your job
is the person who does it.

Prefer to talk? 0400 364 638

Related services

Office Fit-outs by suburb

Office Fit-outs near you

Call EricFree quote