Skip to content
Zap Electrical & Data

Ceiling Fan Installation · Cheltenham

Ceiling Fan Installation in Cheltenham

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657

A fan is a modest job, but in the older streets of Cheltenham it often uncovers something bigger. Post-war weatherboards and cream-brick homes still turn up with porcelain fuses and lighting circuits that have no safety switch at all. Before a fan goes onto a circuit like that, Eric checks how it is protected and tells you plainly whether the board should be sorted first. Newer townhouses and small businesses near Charman Road and Southland bring their own, simpler versions of the job.

About our ceiling fan installation service

Older boards and lighting circuits

Connecting a new fan to an old lighting circuit is technically possible, but if that circuit runs from a rewireable fuse with no RCD, any fault on the fan leaves you unprotected. In those homes we quote two ways: the fan alone, and the fan with an RCBO or a switchboard upgrade.

You pick. In the 1970s units, boards sit in a small cupboard or meter box and space for extra protection is tight. Fans themselves draw little power, so a new circuit is rarely needed; protection is the real question.

Consulting rooms and small shops

Treatment rooms, studios and small shopfronts around the station often have no ducted cooling and a split system that struggles on hot afternoons. A ceiling fan helps it along at low running cost.

In a commercial tenancy, the fan has to hang from the building's framing rather than the tile grid of a drop ceiling, and the work is recorded on a Certificate of Electrical Safety. We start at 7am, so the job is often finished before the first client arrives. In a treatment room, a slower DC fan with a quiet motor keeps the space calm.

FAQ

Common questions

Can a fan go on an old porcelain-fuse circuit?

It can be wired, but we would not recommend leaving it without RCD protection. We show you the options in writing, from a single RCBO to a full board upgrade, and leave the choice to you.

Can you replace a wobbly old fan?

Yes. Wobble usually comes from a loose bracket, a bent blade or a canopy fixed only to plaster. We remove it, check the support, brace it to the frame if needed and hang the new fan level and balanced.

Book a free on-site quote

Call EricFree quote