Skip to content
Zap Electrical & Data

Electrical Fault Finding · Chelsea

Electrical Fault Finding in Chelsea

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657

Faults in this suburb tend to depend on the building. In the 1960s and 70s blocks of flats close to the water, step one is working out whether the problem sits in one unit or on shared property.

In the brick veneer homes back towards the Heights, it is often outdoor gear: pool pumps, gate motors and roller doors. On the Station Street strip, a tripping circuit costs a shop trading time. Eric tests each situation from the switchboard out, and tells you plainly where the fault is and who is responsible for it.

About our electrical fault finding service

A fault in a unit block

Most older Chelsea blocks have a main switchboard on common property feeding a small board in each unit. If your lights or power fail, the cause could be inside your unit, in the submains between the boards, or at the main board.

We test your unit board and circuits first, then the supply arriving at it. If the fault turns out to be on common property, we give you and the owners corporation manager a written note of what was found, so the repair can be approved by the right party.

Power that trips overnight

A safety switch that drops sometime after midnight is a useful clue. In many homes the electric hot water service runs on an off-peak circuit that switches on late at night, and a heating element that has started to fail leaks current to earth as soon as it powers up.

Pool pumps and gate motors on timers can do the same. We note which circuit tripped, test the hot water element and any timed equipment, and tell you whether the appliance needs repair or the wiring does. A note of the time the trip happened is a big help.

FAQ

Common questions

Can you find a fault in my shop before trading starts?

Yes. Early-morning visits are possible during our normal hours, and where a fault needs the power off for testing, we agree the timing with you first. Afterwards you receive the findings in writing, along with what the repair would involve.

Who pays when the fault is in a unit block's shared wiring?

That depends on where the fault is. Wiring inside your unit is usually the owner's responsibility, while common property belongs to the owners corporation. Our report shows exactly where the fault sits, which makes that conversation much easier.

Book a free on-site quote

Call EricFree quote