Skip to content
Zap Electrical & Data

Residential Electrician · Chelsea

Residential Electrician in Chelsea

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657

Housing here runs from 1950s weatherboards near the beach to brick veneer family homes towards Chelsea Heights, with blocks of flats and new townhouses in between. Household electrical work varies just as much. A flat might need its fuse board replaced and a circuit added for a split system; a family home might need outlets in the garage and lighting down the side. We are about ten minutes away, and you deal with Eric from the quote through to the finished job.

About our residential electrician service

Inside a flat or unit

Many of the flats near the beach still have a small unit board with rewireable fuses and a handful of circuits shared across the whole home. Adding a split system, a bigger oven or a dryer can push those circuits past what they were designed for.

Work from your own unit board onwards is generally yours to arrange. We replace the board with circuit breakers and RCDs, add dedicated circuits for new appliances, and confirm with you whether anything needs the owners corporation's sign-off, such as work at the shared meter panel.

The garage, the driveway and the side path

Further from the water, the brick veneers on bigger blocks are mostly about practical additions. Garages that have become storage, a gym or a workshop need more than the one outlet they were built with.

Gate motors and roller doors need power where the installer wants it, and a second fridge deserves its own outlet rather than a double adaptor. Sensor lights over the driveway and down the side path make arriving home after dark easier. We work out where each item goes first, then group the work so it is done in one visit.

FAQ

Common questions

My unit's lights go out when the heater is on. Why?

In older flats the lights and power are sometimes on undersized fuses, or a fault is tripping a shared device. We test the circuits, find what is overloaded or faulty, and fix it, often by upgrading the unit board and splitting the load.

Will a new oven work on my existing circuit?

Not always. Many electric ovens need a dedicated circuit of the right rating, and an older flat may have the oven sharing a circuit or wired with light cable. We check the appliance's rating against the circuit before installation.

Book a free on-site quote

Call EricFree quote