Skip to content
Zap Electrical & Data

Emergency Electrician · Mount Martha

Emergency Electrician in Mount Martha

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657

Plenty of houses here are weekenders, so the first person to learn about a problem is often a neighbour or the owner checking a camera from the city. Inland, a dead pressure pump can leave a family with no water as well as no power. Older beach houses still running rewireable fuses add their own risks when something fails. Whatever the situation, call and describe it. Eric will tell you whether it needs a callout now, and what can be done safely in the meantime.

About our emergency electrician service

When nobody is at the house

We can attend a property that is empty if access is arranged, for example a key left with a neighbour or a lockbox code given over the phone. Eric makes the site safe, works out what failed and rings you with what he found before any repair beyond making safe goes ahead.

Common causes at an unoccupied house include a storm trip that took out the fridge circuit, water through a leaking roof into a light fitting, and possums chewing cable in the ceiling. Photos can be sent so you can see the damage yourself, and the house is left with the fridge and freezer running wherever their circuits test safe.

No power to the pump means no water

On blocks relying on rainwater tanks, the pressure pump is the difference between running taps and none. If the pump stops, check whether its isolator is on and whether a safety switch at the board has tripped. A pump that trips the safety switch repeatedly may have water in its terminal box or a failing motor, and should be left off.

We test the circuit and the pump connection, restore supply if the wiring is sound, and tell you whether the pump itself needs a plumber or replacement. In the meantime, a garden tap fed straight from the tank by gravity may still give you some water.

FAQ

Common questions

Our old fuse keeps blowing. Can I put in thicker fuse wire?

No. Heavier fuse wire lets the circuit carry more current than the cable can handle, which is how fires start. Leave the circuit off and call. A blowing fuse means something on that circuit is faulty or overloaded.

Water is dripping through a light fitting. What should I do?

Turn off the main switch at the board if you can reach it without standing in water, keep clear of the fitting, and call. Do not switch that circuit back on until it has been dried and tested.

Book a free on-site quote

Call EricFree quote