Skip to content
Zap Electrical & Data

Electrical Fault Finding · Melbourne CBD

Electrical Fault Finding in Melbourne CBD

  • Free on-site quote
  • No call-out fee on quoted work
  • 12-month workmanship warranty
  • REC 23657

In a city building, a fault in your tenancy sits inside a larger system run by building management. The cause might be in your distribution board, in equipment a previous tenant left behind, or on the base-building supply that facilities staff control. Eric works out which side of that line the fault is on, follows the building's contractor rules, and plans any testing that needs power off with management. City visits are booked ahead, and findings are written up for the tenant and the building.

About our electrical fault finding service

Tenancy board or base building?

Most tenancies have their own distribution board fed from the building's main switchroom. If a whole floor or several tenancies lose power, the fault is probably upstream and belongs to the building. If it is one circuit or one area, it is usually within your tenancy.

We test from your board outwards, check what each circuit actually feeds, and look for leftover alterations above the ceiling. Where the cause traces back to the base building, our written report gives facilities staff something specific to act on. Exit and emergency lighting on the floor stays in service while we test, as the building requires.

Retail and hospitality tenancies

Kitchens and bars run commercial dishwashers, ovens, refrigeration and coffee machines that load circuits hard and are cleaned with water. Shops rely on display lighting and point-of-sale equipment. Faults that trip during service or at opening are often one appliance leaking current, or a circuit carrying more than it was designed for.

We test each item and circuit, and schedule testing that needs isolations outside trading, with building management notified in advance. Refrigeration faults are looked at first because stock is involved, and where the cause sits inside an appliance, findings go to its service agent.

FAQ

Common questions

Can you test outside business hours in a city building?

Yes, by arrangement. Our usual hours are weekday daytime, so isolations that management wants done after hours are booked with them ahead of time and priced in the written quote.

Who pays if the fault turns out to be in the base building?

That depends on your lease. Our written report sets out where the fault was found and what was tested, so the tenant, landlord and building management have a clear basis for deciding who pays for the repair.

Book a free on-site quote

Call EricFree quote